Category
Fiber Optic Patch Cord, MPO/PC(F)-4xLC/PC(F), 8 Fibers, Multimode (OM3), Plenum (OFNP), Type B, Aqua
Product Highlights
*8-Fiber OM3 Multimode Cable Assembly
*Female MPO/PC Connector to Four LC/PC Ends
*Type B Configuration for Compatible Channel Designs
*Breakout Construction for MPO-to-LC Connections
*Aqua OFNP-Rated Cable Jacket
8-Fiber OM3 MPO-to-LC Breakout Cable, Type B
Specifications
Product Name | Fiber Optic Patch Cord | Brand | Firstoptic |
Connector A | MPO/PC(F) | Connector B | LC Duplex |
| Polish Type | UPC to UPC | Polarity | Type B |
Fiber Mode | OM3 50/125μm | Wavelength | 850/1300nm |
Material | LSZH | Cable Jacket | Plenum (OFNP) |
Cable Outside Diameter (OD) | 3.0mm | Breakout Outside Diameter (OD) | 2.0mm |
Connector Durability | 500 times | Tensile Strength (Long/Short Term) | 90/180N |
Insertion Loss | ≤0.25dB | Return Loss | ≥20dB |
Attenuation at 850 nm | ≤3.0 dB/km | Attenuation at 1300 nm | ≤0.7 dB/km |
Operating Temperature | -10 to 60°C (14 to 140℉) | Storage Temperature | -10 to 70°C (14 to 158℉) |
MPO-to-LC Breakout Configuration
The MPO end of this mpo to lc breakout cable combines eight fibers in one connector. At the opposite end, the fibers are distributed to four LC connection ends.
The MPO/PC connector is listed as female, without guide pins. Confirm the mating connector’s pin configuration and check the LC interface requirements before installation.
For this om3 mpo breakout cable, verify each branch’s fiber assignment against the equipment and channel design. Type B alone does not establish the correct transmit-to-receive connection.
Applications
This 8 fiber mpo to lc cable is intended for compatible OM3 multimode links where an MPO interface connects to LC interfaces:
- MPO-to-LC connections between compatible network equipment
- Connections through appropriately configured MPO and LC patch panels
- OM3 cabling deployments requiring individual LC branches
- Data center cabling routes specifying an OFNP-rated jacket
Before using this mpo to lc breakout cable with parallel-optics equipment, confirm the MPO connector type, populated fiber positions, LC branch mapping and supported OM3 link distance.
Standardized Production
Polarity test
Insertion/return loss detection
End detectionQ1: What is the difference between an MPO-to-LC breakout cable and an MPO-to-MPO cable?
An MPO-to-MPO cable has an MPO connector at each end. This mpo to lc breakout cable has an MPO connector at one end and four LC connection ends at the other.
Q2: Can this om3 mpo breakout cable connect directly to any optical module?
No. Check the module’s connector type, fiber requirements and channel configuration. The presence of an MPO or LC interface alone does not establish compatibility.
Q3: How should the LC branches of this 8 fiber mpo to lc cable be connected?
Follow the assembly’s branch labels and fiber-mapping documentation. Confirm that the transmit and receive paths match the connected equipment.
Q4: What should be checked before ordering?
Confirm the total cable length, branch length, LC connector configuration, MPO connector gender, Type B mapping and OFNP jacket requirement.
Fiber Optic Patch Cord, MPO/PC(F)-MPO/PC(F), 12 Fibers, Multimode (OM3), Plenum (OFNP), Type B, AquaThis 12-fiber OM3 MPO fiber patch cord features female MPO/PC connectors at both ends and Type B polarity. Built with OM3 50/125μm multimode fiber, it provides multi-fiber connections for high-density data center cabling, including compatible MPO patch panels, fiber cassettes and network equipment. The cable has a 3.0mm outer diameter and an insertion loss of ≤0.25dB. Product Highlights *12-Fiber OM3 50/125μm Multimode Fiber *Female MPO/PC Connectors at Both Ends *Type B Polarity *Low Insertion Loss of ≤0.25dB *3.0mm Cable Diameter for High-Density Cabling12F MPO/PC(F)-MPO/PC(F)-OM3-3.0 Type B, AquaSend Inquiry- Fiber Optic Patch Cord, MPO/PC(F)-MPO/PC(F), 12 Fibers, Multimode (OM4), Plenum (OFNP), Type B, AquaDesigned for OM4 multimode cabling, this om4 mpo patch cable combines 12 fibers with female MPO/PC connectors at both ends. Type B polarity provides reversed fiber-position mapping, while the aqua jacket identifies the cable within the installation. This 12 fiber om4 mpo cable features an OFNP-rated jacket for projects that specify plenum cabling. Product Highlights *OM4 Multimode Fiber for OM4 Cabling Systems *12 Fibers in a Single MPO Cable Assembly *Female MPO/PC Connectors at Both Ends *Type B Polarity with Reversed Fiber Mapping *OFNP-Rated Aqua Cable Jacket12F MPO/PC(F)-MPO/PC(F)-OM4-3.0 Type B, AquaSend Inquiry
Fiber Optic Patch Cord, MPO/PC(F)-MPO/PC(F), 12 Fibers, Multimode (OM4), Plenum (OFNP), Type B, MagentaThis magenta mpo patch cable provides a distinct color option for identifying OM4 connections in data center cabling. The assembly combines 12 multimode fibers, female MPO/PC connectors at both ends and Type B polarity. With an OFNP-rated jacket, this om4 mpo patch cord is intended for compatible installations that specify plenum cabling. Product Highlights *Magenta Jacket for Visual Cable Identification *OM4 Multimode Fiber Construction *12-Fiber MPO Connection Format *Female MPO/PC Connectors with Type B Polarity *OFNP-Rated Jacket for Specified Plenum Applications12F MPO/PC(F)-MPO/PC(F)-OM4-3.0 Type B, MagentaSend Inquiry
Fiber Optic Patch Cord, MPO/PC(F)-MPO/PC(F), 8 Fibers, Multimode (OM3), Plenum (OFNP), Type B, AquaThis 8 fiber mpo cable combines OM3 multimode fiber with female MPO/PC connectors and Type B polarity for compatible eight-fiber cabling designs. It is intended for projects that specify eight populated fibers rather than a 12-fiber assembly. With an aqua OFNP-rated jacket, this om3 mpo patch cord provides a defined configuration for equipment and patching connections. Product Highlights *8-Fiber Assembly for Compatible Parallel-Optics Links *OM3 Multimode Fiber Construction *Female MPO/PC Connectors at Both Ends *Type B Polarity for Specified Channel Designs *Aqua OFNP-Rated Cable Jacket8F MPO/PC(F)-MPO/PC(F)-OM3-3.0 Type B, AquaSend Inquiry
Send Message